DTG Revelation II, Руководство пользователя

Страница: 30 / 36

Manual Revelation II
30
You should start Revelation II in Transparent mode to access the board over the Bluetooth
connection.
The main window will show the board. When the proper Com Port number is not yet chosen, there is
a good chance that there are no chess pieces shown.
Of course it is a good idea to put all pieces on the Revelation in this phase.
Click on the “Settings” menu and chose “Configure driver”
Then chose the “Connection” Tab first.
Select one of the ports that have a suffix (BT).
After a few second (up to 15) the big square should turn green and
show “Board alive” The Revelation does not support a DGT XL
clock so the smaller square on the right will stay red indicating “No
Clock”
Please note that this window may be smaller on your computer
and will not show all tabs. Two arrows will be shown in the upper
right corner that will allow you to scroll horizontally.