background image

H25T2001S

T2001S Operating Instructions

page 2

©2000 DTC Communications, Inc.

MODEL T-2001S TRANSMITTER

OPERATING INSTRUCTIONS

Contents

1 T-2001S Transmitter
6

 

Duracell AAA Batteries

1  MA-70-5 Microphone-Antenna Assy.
1 Data Sheet
1 Operating Instructions

Description

The T2001S is a synthesized VHF 1Watt audio transmitter, compliant with the NTIA
specification for Narrowband operation. Via a simple PC programming interface, as
many as 10 channels over the entire 150 to 174 MHz band may be installed in memory.
This transmitter is miniaturized and ruggedized, being designed for body worn personal
protection and evidence gathering missions. The time to half power with AAA Alkaline
batteries is greater than 4 hours. The transmission is a narrow-band FM signal, of 2.5 kHz
deviation. The T2001-S transmission is duplexed on the microphone cable; meaning the
microphone is the antenna. The audio circuitry is built around a DTC proprietary gain
control (AGC) circuit, and a high-quality Knowles microphone.

Operation

1. Controls

ON

 – GREEN

OFF

-   RED

Channel Select 

- 10 Position Rotary

2. Programmed Features

Channel Frequency

- 1 thru 10

AGC

- ON / OFF

3. Connectors

 Microphone/Antenna
Programming Connector

Содержание T2001-S

Страница 1: ...H25T2001S T2001S Operating Instructions page 1 2000 DTC Communications Inc DTC COMMUNICATIONS INC Operating Instructions for the T2001 S Personal Protection Transmitter Version 1 0 OP19200XX ...

Страница 2: ...nstalled in memory This transmitter is miniaturized and ruggedized being designed for body worn personal protection and evidence gathering missions The time to half power with AAA Alkaline batteries is greater than 4 hours The transmission is a narrow band FM signal of 2 5 kHz deviation The T2001 S transmission is duplexed on the microphone cable meaning the microphone is the antenna The audio cir...

Страница 3: ...battery door to the right and install six fresh AAA batteries being careful to observe polarity Replace the door by sliding it to the left Verify that the power switch located on the top control surface is in the RED off position Attach the Microphone to the connector on the top of the unit This is a push on pull off locking type connector Connect the microphone antenna to the transmitter by simpl...

Страница 4: ...arness 1 Try to locate the microphone in an area that pickup will be best and rubbing noise is least Avoid the arms legs crotch or under the arms or the waist area Front torso mounting is ideal 2 Always provide a small amount of strain relief on the microphone cable itself This reduces the noise caused by the microphone cable and element being tugged and prevents cable damage 3 Secure the micropho...

Отзывы: