DTC T-2350, Руководство пользователя

Страница: 8 / 24

8
miniSD TM
Card
miniSD
TM
Card
Adapter (to be
used with Card
Reader)
miniSD
TM
Card
miniSD
TM
Card
miniSD TM Card
The T-2350 uses an industry-standard miniSD™ card to make audio
recordings. A 512 MB card, an SD to miniSD adapter, and an SD card reader
are provided with a new T-2350. The audio is recorded in a Windows PCM
waveform format (.wav file). Should the need to replace the card arise, they can
be purchased at most major retailers in various densities from 32 Mb to
512 Mb. Higher densities may be available in the future. As an example, a 32Mb
card will provide approximatley 30 minutes of recording time, 64Mb wil provide
about 60 minutes, etc. The 512 Mb card included with the transmitter will
provide well over 8 hours of recording time. Generally speaking, 1 MB of
memory will provide about 1 minute of recording.
Every new miniSD™ must be properly formatted before it can be used.
Formatting is a simple process that can be done on almost any Microsoft
Windows equipped PC, Laptop, Notebook, and some hand-held PCs. Typically,
this will only need to be done once on each card.
Installing miniSD TM Card
The miniSD™ card slot is accessed by sliding the side panel down (Figure 2).
The Card is inserted with the gold tabs facing the same side as the Channel
Switch. When installed, a red LED will be illuminated indicating that the card
should not be removed due to file management activity. Wait until the red LED
is OFF before removing the card by gently pushing in until it releases.
SD Card
Reader
NOTE: Never insert or remove the card while power is ON.