SOL8SDR-C Quick Start Guide
Revision 1.0
Page 2
The SOL8SDR-C IP address can be established using DTC’s Node Finder application.
If DHCP settings need to be disabled and a fixed address applied, right click on the device to reconfigure.
Double click the device on Node Finder to open web browser communications.
On authentication, leave the Username blank and enter the Password as
Eastwood
.
Go to the
Configuration>
Preset
>Encoder
tab and set the Video Source and Format to match the attached
camera. Click
Apply
at the bottom of the page to save the settings.
Go to the
Configuration>
Preset
>Modulator
tab and make the settings for your system, highlighted below.
Click
Apply
at the bottom of the page to save the settings. These settings
must
be matched at the receiver.
