Contents
6. Technical Specification
Amplifier
Specification
Power Output
RMS50-Watt
No. of Mic Input
1 x Wired Microphone by combination jack
1 x UHF Wireless Microphone (Other frequencies are option)
Volume Control
1 x Wired Microphone
1 x Wireless Microphone
1 x Aux
Tone Control
Voice-over
1 x Treble / 1 x Bass, ±12dB Independent
Adjustable 0 ~ 100%/0 ~ max. 1.5sec
Digital Echo
CMOS 44K memory / Delay time: 31ms ~ 340ms
Aux. Input/Output
1 x In-RCA / 1 x Out-RCA with Volume control
Speaker
6.5” Dynamic Full range + 2.5” Tweeter
External Speaker
>16Ω
Built-In Battery
12V/3AH, Rechargeable & Sealed
Battery Charging
Approx. 8 - 10hours for a Single charge
Discharge Protection
10.6V (Factory set: Lowest voltage for ABMR)
AC/DC Adapter (SMPS)
AC100-240V 50-60Hz / DC15V/2A UL/CE/CSA/TÜV
Weight
Approx. 8Kg-Nett
Dimensions
270mm(L) x 205mm(W) x 245mm(H) Nett
Wireless System
Specification
Carrier Frequency
UHF 863-865MHz (Other frequencies are optional)
Pre-set Frequency
16-Ch Selectable Frequencies
Frequency Stability
±0.005%
Modulation
PLL Synthesized
Frequency Response
50Hz – 15khz ±2dB
Max. Distortion
≥0.3% at 1kHz, 15kHz DAV
Dynamic Range
More than 90dB
RF Transmitter Power
10mW (Can be adjusted basing on regulation)
Max. SPL
110dB SPL
Receiving Method
F3E
S/N (15kHz DAV 100µV)
More than 90dB
1)
TRamp-US Panel
2)
Operating Instructions
3)
Battery Operation & Recharging
4)
Important Notes
5)
Warranty Information
6)
Technical Specification
USB/SD-Card Player
Specification
USB Player
Support MP3-USB with USB2.0
Function
Mode, 10 / -10 , F / B ward, Volume
External Memory
Unlimited
