1. -US Panel
3. Battery Operation & Recharging
Automatic Battery Monitoring & Recovery System (ABMR)
The main amplifier is equipped with an auto battery monitoring and recovery system. This continuously monitors the battery
and will automatically turn-off the amplifier completely if the voltage drops to a dangerous level, which might harm
the battery. The system can instantly recover by switching on the supplied AC/DC adapter. When the low-battery LED
illuminates, the built-in battery needs to be charged immediately. Plug in the AC/DC adapter to input jack on the front
panel. The charge LED will illuminate and will automatically turn off when the charging completed in approx. 12h. Continue
to charge some extra hours to ensure battery fully charged.
5. Warranty information
DTC Audio hereby warrants that this product will be free from defects in material and workmanship for a period of one year
from the date of purchase. At our option, we will repair or replace the defective product and promptly return it to you. You
should retain proof of purchase to validate the purchase date and return it with any warranty claim.
If you believe this product is defective within the warranty period, carefully repack the unit, insure it, and return it freight
prepaid to your nearest dealer or authorized service center or direct to us.
This warranty does not apply in case of abuse of the product use contrary to our instructions, or unauthorized repair. All
implied WARRANTIES of MERCHANTABILITY of FITTNESS FOR A PARTICULAR PURPOSE are disclaimed and we hereby disclaim
liability for incidental, special or consequential damages resulting from the use or unavailability of this product.
THIS WARRANTY SUPERSEDES ALL WARRANTIES THAT ARE INCLUDED WITH THIS PRODUCT.
4. Important Notes
- The impendance of the external speaker should be greater than 16Ω.
- Do not use an AC/DC adapter other than that supplied otherwise guarantee void.
- Please do not use a fuse other than the specified rated one of 250V/10A.
- Charging should be done at regular intervals to conpensate for natural discharging.
Memo
NOTE: The information contained in this manual is believed to be correct at the time of going to press. However, DTC Audio
reserves the right to change or modify the specification without notice or obligation to update existing units
WIRELESS MIC-1
AUX
WIRELESS MIC-2
USB/SD-CARD
OR
VOICE PRIORITY
DSP ECHO
IMPEDANCE
15V
4.5A
FUSE
USB SD-CARD PLAYER
SEN
SOR
BATTERY MONITOR
BATTERY MONITOR
USB/SD
POWER
VOL
FOL
FR
FF
-10
MODE
+10
US
Bass
Tone Control
Power On/Off
Switch
Volume for
Wireless Mic1
Treble
Tone Control
Volume for
Wired Mic
Volume for
CD Player
Aux. Volume or
Wireless Mic2
(Option)
Battery Charging
LED
Battery Level
Indicator LED
Power LED
Aux In/Out
Jack
Ext. Speaker
Jack (16
Ω
)
Wireless Ant
Wireless Ant
Combi-Jack for
XLR/1/4” Phone
Safety Grip
16-Ch Frequency
Selector Switch
2nd 16-Ch Freq.
Selector(Option)
On-Air LED
Volume for Aux
or 2nd 16-Ch
Selector(option)
Voice Priority
Echo
Extra Remote
Sensor (Option)
Fuse
AC/DC Adapter
Input jack
-10
Back skip
/Fast
+10
Forward skip
/Fast
USB/SD-Card
Slot
Power LED
Volume for
USB/SD-Card
Folder a search
Mode
LCD Display
