SPLINE
®
Technical Manual
6
G
e
neral Ma
inte
na
nce
Informa
ti
o
n
V2
01
3.
1
1
_E
N
1.1
General Maintenance Information
Cleaning
For an optimal result of the maintenance works, every component that will be disassembled must be cleaned.
There may only be used cleaners which do not damage the components. Especially the cleaning of o-rings and
sealings requires mild cleaners. Always consider the instructions of the respective cleaner.
DT Swiss recommends the following cleaners:
•
Motorex Rex
•
Motorex Swissclean
•
Motorex OPAL 2400, OPAL 3000, OPAL 5000
Use soap water or similar mild cleaners for external cleaning.
Tools
To ensure a damage-free mounting and dismounting of the components, only use the tools which are menti-
oned in this manual. The usage of differing tools is up to the user. If components are being damaged by the
usage of differing tools, the user is liable.
Environmental Protection
Whenever possible, waste has to be avoided. Waste, especially carbon, lubricants, cleaners and any other fluids
must be disposed in an environmentally compatible manner.
Only print this manual, if electronical usage is not possible.
Disclaimer
The operations described in this manual should only be done by professionals. The user is liable for any damage
or consequential damage which is caused by wrong maintained or wrong installed components. If you have
doubts, please contact a DT Swiss service center.
