ENGLISH
2
3
ENGLISH
Connec�ng Peripherals
Make sure your monitors are connected the Mul� Screen Appliance with suitable cables. A�er
the peripherals are connected, plug the power cord into the Appliance and insert the other end
into a power outlet.
NOTE:
DO NOT connect the power cord before connec�ng all cables to the MS Appliance.
NOTE:
Make sure the power supply switch is on before you power on the system.
•
To exit the full screen introduc�on, press “Ctrl+Shi�+Space” to exit the WebDT Signage Player.
•
To re-launch the WebDT Signage Player,
n
avigate to Start | All Programs |
D
T Research |
WebDT Signage Player | Start player.
•
To register this signage appliance to
a
nother WebDT Content Manager Server, navigate to Start
| All Programs |
D
T Research | WebDT Signage Player | Register Player Again, and then the
Player Registra�on dialog will be launched. Fill in all fields to register. Click OK to register and
connect to the preferred WebDT Content Manager Publish Server.
•
Please refer to documenta�on included in the DVD of your package to start m
anaging your
content, playlists and schedules via WebDT Content Manager.
Connect Player and Register to WCM Server
When you power on your Mul� Screen Appliance, the registra�on dialog will be launched
automa�cally. You can also launch it from
Start | All Programs | DT Research | WebDT Signage
Player | Register Player Again
.
NOTE:
If your signage player is located in a LAN with a WCM server, the player will automa�cally
register to the server in the same LAN.
Using Cable Extenders
To be compa�ble with the Mul� Screen Appliance, the extenders should be with EDID
management
func�on. Once you make sure the display issues are due to the video cable extenders, please
contact your local reseller or system integrator to recommend verified extenders to you.
Registra�on Informa�on:
Player name:
Leave default name or give a new name
Group name:
If you did not create a group in WCM
server yet, leave it blank now
Organiza�on name:
my site (default)
Access Password:
123456 (default)
Publish Server URL:
h�p://(server IP address): (port number)/publish
o
r, h�p://localhost: (Port number)/publish
Powering ON and OFF
The Power Bu�on is located on the front of the Mul� Screen Appliance.
To turn the
Mul� Screen Appliance on, push and release the Power Bu�on on the front bezel.
The power LED will be lit (blue), and the corresponding interface will be shown on the display
monitors.
To turn off the device, use the so�ware shutdown interface provided.
If your MS player hangs up, please restart it from WCM or RDP rather than pressing the power
bu�on to restart, otherwise the OS may become corrupted.
Mul�ple Screen Layout Designer/ MS Quick Start Guide
DT Research provides this tool to help you adjust the screen layout. Mul�ple Screen Layout Designer
can be installed on a PC or laptop to manage the screen layouts of the Mul� Screen Appliances in
the same LAN. You can install this applica�on and view the Quick Start Guide from the WCM DVD or
download the Mul� Screen Appliance Quick Start Guide from:
www.signage.dtri.com/support/wcm/MS_Layout_Designer_QSG_EN.pdf
