www.dtresearch.com
To Test Barcode Scanner Module
Click
1.
Start | All Programs | Accessories | NotePad
to run the Notepad.
Scan one of the several supported barcodes.
2.
The output will appear in the Notepad screen.
Verify the captured data.
3.
The Default Port Parameters for Barcode Scanner Module
Port
COM3
Baud Rate
115200
Data Bits
8
Parity
None
Stop Bits
1
Flow Control
None
Note:
Please refer to Hyper Terminal Settings to confirm or change the port parameters.
SPECIFICATIONS
Scanning
Performance
Scan rate
60fps auto adaptive
Scan angle
Tilt: 360°/ Pitch: ±45°/ Skew: ±65°
Optical resolution
CMOS 844 X 640 pixels
Print contrast
down to 20%
Note: Specifications are subject to change without notice.
Linear Imager Compliance and Precaution
This product complies with the following standards for laser and LED safety.
IEC 60825-1 Class2 LASER Product
Scanner 2/2
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
http://www.dtresearch.com
Copyright © 2015, DT Research, Inc. All Rights Reserved.
