5
UHF RFID Reader:
The optional UHF RFID reader supports EPC Gen2V2 and ISO 18000-63 standard. To
develop an application to use the UHF RFID reader, contact your device provider for a
UHF RFID reader API package
Data Capture Module Operation Guide
If your DT382GL/ DT382GS comes with an RFID Reader refer to the steps below to
configure the settings.
For More Support
Users can download the Tablet Modules Basic Operation Guides from the DT Research
website.
NOTE:
To ensure the system performance, turn on only the symbologies you are going to use.
4
Start Up
I
f the power up (from Standby mode or otherwise) is successful, the appropriate
interface will be displayed after a launch sequence of several seconds. The wireless
LAN connection may take 10-15 seconds to be established.
Wireless Networking
Wireless LAN
The DT382GL/ DT382GS
is often delivered with an embedded (user-inaccessible)
802.11ac
LAN adapter equipped with a hidden custom antenna.
• T
hrough the support of typical WLAN adapters, the
DT382GL/ DT382GS should be
able to d
etect all 802.11 access points in the vicinity for you to select the access
point of y
our choice for connection.
• T
he SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT362G and the
a
ccess points have to match. The SSID is case-sensitive and it is recommended
t
hat you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for
secure access.
•
When WEP/WPA/WPA2 is enabled, you may need to consult your network
a
dministrator or your networking equipment literature to properly configure
a
ssociated settings such as Authentication mode, etc.
• R
efer to the access point operating manuals for setting up the 802.11 access
points.
Bluetooth
The Bluetooth configuration application is enabled from the System Tray or from the
Windows Mobility Center
. Follow the instructions and options provided within the
application to configure and invoke Bluetooth connectivity with the corresponding
peripherals.
