DT372
ENGLISH
6
7
ENGLISH
Bluetooth
The DT372 features a built-in Bluetooth adapter that operates on the Microso
ft
Windows Bluetooth protocol. The Bluetooth con
fi
gura
ti
on applica
ti
on is invoked from
the System Tray or from the Control Panel for Windows XP. Follow the instruc
ti
ons and
op
ti
ons provided within the applica
ti
on to con
fi
gure and invoke Bluetooth connec
ti
vity
with the corresponding peripherals.
NOTE: Bluetooth devices or accessories that are not compa
ti
ble with the Microso
ft
Windows Bluetooth protocol may not work with the DT372.
Bu
tt
on Management
Where supported by so
ft
ware, many of the hard bu
tt
ons on the DT372 are
programmable to perform a func
ti
on of the user’s choice. The excep
ti
on is the Power
Bu
tt
on and the SAS Bu
tt
on. To ac
ti
vate the bu
tt
on re-assignment applica
ti
on, invoke the
Bu
tt
on Manager applica
ti
on, e.g., in Windows XP Embedded
.
Brightness Control
Where supported by device
fi
rmware and so
ft
ware, a hard bu
tt
on may be engaged to
manipulate the display brightness. Press the System Menu bu
tt
on (Bu
tt
on 7) on the front
of the DT372. The System screen will display a Brightness control sec
ti
on with up and
down arrows that can be ac
ti
vated with the stylus.
Ba
tt
ery and Power Management
The DT372 is equipped with an internal 3760mAh Li-Ion ba
tt
ery pack that is capable
of suppor
ti
ng approximately 3 - 4 hours of con
ti
nuous opera
ti
on. The period between
ba
tt
ery recharges can be signi
fi
cantly lengthened by pu
tti
ng the device into Standby
mode through the Power Bu
tt
on (see Bu
tt
ons Func
ti
on Table) whenever the device is
not in use. Depending on the opera
ti
ng so
ft
ware, the DT372 may also be con
fi
gured to
enter various power-saving modes via the Power Bu
tt
on or through
ti
med entry.
Desktop Cradle
The DT372 is complemented by an op
ti
onal Desktop Cradle for support, pass-through
charging, and connec
ti
on to a range of USB peripherals, including keyboard and mouse.
The Cradle o
ff
ers the following interfaces: a DC-in port for the AC-DC adapter, an
Ethernet port, and USB ports. Always seat the DT372 securely onto the cradle. The cradle
must be powered by the AC-DC adapter for the Ethernet and USB ports to func
ti
on. The
ba
tt
ery packs on the DT372 may be recharged by connec
ti
ng the AC-DC adapter directly
to the DC-in port on the DT372 or through the DC-in port on the Desktop Cradle while
the DT372 is docked to the Cradle.
USING THE DT372
Memory & Storage con
fi
gura
ti
on
The DT372 is available with 2GB memory con
fi
gura
ti
on. Storage op
ti
ons currently range
from 2GB to 32GB
fl
ash memory.
Peripherals Support
Through its USB ports, the DT372 supports a wide range of USB-based peripherals.
These peripherals are applicable for so
ft
ware installa
ti
on, applica
ti
ons storage, data
storage, and system so
ft
ware recovery and updates. The DT372 is also compa
ti
ble with
custom mountable cradle op
ti
ons. These securable and mountable cradles provide an
interface to VESA mounts and arms, and to ports that may include USB, Ethernet and
pass-through power.
