5
ENGLISH
Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate
interface will be displayed a
ft
er a launch sequence of several seconds. The wireless LAN
connec
ti
on may take 10-15 seconds to be established.
Con
fi
guring the Mobile Tablet
The DT315CR may be con
fi
gured using the u
ti
li
ti
es and methods dictated by the
so
ft
ware opera
ti
ng system. The DT315CR should be con
fi
gurable for various proper
ti
es
such as user pro
fi
les, network features, and several system elements.
Wireless Networking
Wireless LAN
The DT315CR is o
ft
en delivered with an embedded (user-inaccessible) 802.11ac WLAN
adapter equipped with a hidden custom antenna.
Through the support of typical WLAN adapters, the DT315CR should be able to
•
detect all 802.11 access points in the vicinity for you to select the access point of
your choice for connec
ti
on.
The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT315CR and the
•
access points have to match. The SSID is case-sensi
ti
ve and it is recommended
that you enable WEP/WPA/WPA2 encryp
ti
on (or advanced alterna
ti
ves) for secure
access.
When WEP/WPA/WPA2 is enabled, you may need to consult your network admin-
•
istrator or your networking equipment literature to properly con
fi
gure associated
se
tti
ngs such as Authen
ti
ca
ti
on mode, etc.
Refer to the access point opera
ti
ng manuals for se
tti
ng up the 802.11 access points
•
.
ENGLISH
4
OPERATION
Powering ON and OFF
To ac
ti
vate the DT315CR, push and quickly release the Power Bu
tt
on. The display will
come on in a few seconds. To put the DT315CR in Standby mode, push and quickly
release the Power Bu
tt
on. To turn the DT315CR o
ff
for extended storage, power o
ff
safely using any so
ft
ware func
ti
on that “shuts down computer” provided in the so
ft
ware
opera
ti
ng system.
NOTE:
The ba
tt
ery packs shipped with your tablet may be low in power—please use the
AC-DC adapter with the DT315CR when se
tti
ng up for the
fi
rst
ti
me to fully charge
the internal ba
tt
ery pack. You may charge the external ba
tt
ery pack with it a
tt
ached
to the DT315CR, or with the op
ti
onal external ba
tt
ery charger kit.
NOTE:
When the ba
tt
ery pack(s) is (are) charging, the blue-colored Ba
tt
ery LED should
blink slowly. If plugging in the AC-DC adapter does not trigger this blinking
ac
ti
vity and the LED stays dark, the ba
tt
ery pack(s) may have been drained
substan
ti
ally. Try unplugging/ replugging the AC-DC adapter to the DT315CR a
few
ti
mes to ac
ti
vate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Bu
tt
on to put the
tablet in “Standby” mode while not in use. Pushing brie
fl
y on the same bu
tt
on
will wake up the system within seconds.
NOTE:
Avoid using the Power Bu
tt
on (“hold 4+ seconds” feature) to turn o
ff
the
tablet—this form of hardware shutdown is intended to be a means of recovery
from lockups, and not as normal opera
ti
on.
