OPERATION
Powering ON and OFF
To activate the DT313Y/ DT313Q, push and quickly release the Power Button. The display will come on in a
few seconds. To put the DT313Y/ DT313Q in Standby mode, push and quickly release the Power Button. To
turn the DT313Y/ DT313Q off for extended storage, power off safely using any software function that “shuts
down computer” provided in the software operating system.
NOTE:
The battery packs shipped with your tablet may be low in power—please use the AC-DC adapter with
the DT313Y/ DT313Q when setting up for the first time to fully charge the internal battery pack.
NOTE:
When the batterypack(s) is (are) charging, the blue-colored Battery LED should blink slowly. If
plugging in the AC-DC adapter does not trigger this blinking activity and the LED stays dark, the
battery pack(s) may have been drained substantially. Try unplugging/ replugging the AC-DC adapter to
the DT313Y/ DT313Q a few times to activate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the tablet in “Standby”
mode while not in use. Pushing briefly on the same button will wake up the system within seconds.
NOTE:
For DT313Y, avoid using the Power Button (“hold 4+ seconds” feature) to turn off the tablet—this
form of hardware shutdown is intended to be a means of recovery from lockups, and not as normal
operation.
4
