Specifications:
Item
DT300Q11
System
CPU
Qualcomm Octa-Core, 2.0GHz
RAM
4GB
Storage
64GB
Operating System
Android 9.0 and 10
Display
11.6” LED-backlight, high-brightness (1000 nits) screen with capacitive touch, outdoor viewable
Display Resolution
1920 x 1200
Network Interface
Wi-Fi 802.11ac, 2.4GHz/ 5GHz dual band; Bluetooth 4.2 LE
Control Switch and
Buttons
1 power button, 2 brightness control buttons, 5 programmable buttons
Indicator
1 power/ battery status LED
Speaker
Built-in speaker
I/O Ports
USB port
USB 2.0 x 1, USB 3.0 x 1, USB Type C x 1 (data transmitting and charging)
Headset Jack
1 (3.5mm)
SD Slot
1 micro SD card slot
Ethernet
Ethernet 10/ 100/ 1000MB Base-T LAN
Mechanical and Environmental
AC/DC Adapter
Input:
100 – 240V AC;
Output:
20V DC, 3.25A
Battery Pack
Hot swappable battery, 7.6V, 6000mAh
Enclosure
ABS + PC plastics and magnesium-aluminum alloy
Dimensions (H x W x D)
8.3 x 12.4 x 0.86 in/ 212 x 316 x 21.9 mm
Weight
3.5 lbs/ 1.6 kg
Regulatory
FCC Class B, CE, RoHS compliant
Operating Temperature
Operation: -10°C to 50°C (-14°F to 122°F)
Storage: -55°C to 70°C (-67°F to 158°F)
Humidity
0% – 90% non-condensing
FCC Regulatory Compliance
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
