4
Start Up
I
f the power up (from Standby mode or otherwise) is successful, the appropriate
interface will be displayed after a launch sequence of several seconds. The wireless
LAN connection may take 10-15 seconds to be established.
Wireless Networking
Wireless LAN
The 362MD/ 362MQ
is often delivered with an embedded (user-inaccessible)
802.11ac
LAN adapter equipped with a hidden custom antenna.
• T
hrough the support of typical WLAN adapters, the
362MD/ 362MQ should be
able to d
etect all 802.11 access points in the vicinity for you to select the access
point of your choice for connection.
• T
he SSID and WEP/WPA/WPA2 (if enabled) parameters on the
362MD/
362MQ and the a
ccess points have to match. The SSID is case-sensitive and it
is recommended t
hat you enable WEP/WPA/WPA2 encryption (or advanced
alternatives) for
secure access.
•
When WEP/WPA/WPA2 is enabled, you may need to consult your network
administrator or your networking equipment literature to properly configure
associated settings such as Authentication mode, etc.
• R
efer to the access point operating manuals for setting up the 802.11 access
points.
Bluetooth
T
he Bluetooth configuration application is enabled from the Windows System Tray
or from the Android Settings APP. Follow the instructions and options provided
within the application to configure and invoke Bluetooth connectivity with the
corresponding peripherals.
5
For More Support
U
sers can download the Tablet Modules Basic Operation Guides from the DT Research
website.
Federal Communication Commission Interference
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• I
ncrease the separation between the equipment and receiver.
• C
onnect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du
Canada.
Содержание 362MD
Страница 4: ...6 7...
