2
3
NOTE:
To obtain protection consistent with any IP rating for the device, the I/O (audio,
power, USB, card reader, etc.) port doors must be closed. If the IP protection is
compromised by mishandling or misuse, such as by leaving port doors open or
improperly closed, any resulting product damage will not be covered under any
DT Research warranty.
A
Headphone Jack
B
LAN Port
C
USB 3.0 Port
PRECAUTIONS
•
Always exercise care when operating and handling the 301SY.
•
Do NOT apply excessive pressure to the display screen.
•
We recommend using the Digital Pen (optional) to keep the screen clean.
•
Avoid prolonged exposure of the display panel to any strong heat source.
Wherever possible, the 301SY should face away from direct light to reduce
glare.
•
If the AC-DC power adapter is used to recharge or power the tablet, do NOT use
any AC-DC adapter other than the one provided or acquired from the manufac-
turer or its partners.
•
In the unlikely event that smoke, abnormal noise, or strange odor is present,
immediately power off the 301SY and disconnect all power sources. Report
the problem to your device provider immediately.
•
Never attempt to disassemble the 301SY, as this will void the warranty.
Input/ Output Ports
Button Functions
BASIC FEATURES
The 301SY rugged tablet integrates a bright display, USB ports, and
embedded networking elements such as wireless LAN and Bluetooth or optional 4G.
A 301SY typically integrates an 802.11ac wireless LAN (WLAN) adapter that may
connect to other wireless devices or access points. If your 301SY does not come
with such a network adapter, please consult your device provider to establish the
desired network connectivity.
BUTTON
ACTION
1
Power Button
2
Programmable Buttons
3
Battery Latch
*Push the switch up to unlock the latch, then slide the latch left to remove the battery.
A
B
E
C
D
Battery/Power LED
1
2
3
2
Brightness
Control buttons
D
USB Type-C Port (power input)
E
Smart Card Reader (DT301Y only)
