DSX Access System, Inc. algo 8028, Руководство пользователя

Страница: 8 / 31

|
Algo 8028 SIP Doorphone
| 8
8028 SIP Doorphone Connections
Basic Connections
Using the diagram above and your 8028 SIP Doorphone Installation and User Guide as references, connect the
doorphone as follows:
1. Using a suitable length of 24AWG twisted pair cable, connect the red and green terminals on the supplied
modular jack to the CTRL terminals on the Door Station. Polarity doesn't matter.
2.
Using the supplied 6-Wire Modular Cable, connect the station jack on the modular jack to the station jack on
the 8028 Control Unit.
3.
Connect the Control Unit to the DSX LAN.
• Connect one end of a CAT5 Ethernet cable to an available switch port on the DSX LAN.
• Connect the other end of cable to the Ethernet jack on the 8028 Control Unit.
4.
Plug the power supply input cable into the power input jack on the back of the Control Unit.
5. Plug the power supply power cord into a suitable 120VAC receptacle.