1. Press and hold the base and turn it counterclockwise, take
down base;
2. According to the number mark on base and connection-wire
diagram, connect wire toNumber corresponding screw with
gasket;
3. Fix the base on the selected position;
4. Cover the alarm body: make the short line on the base aim at
the 10ng line on alarm body and turn clockwise until the long
line on base aim at the long line on alarm body.
BEDROOM
BEDROOM
L
IV
IN
G
R
O
O
M
KITCHEN
BASEWENT
MULTIPLE FLOOR PLAN
Terminal 5 connect “+”
Terminal 2 connect "-"
Terminal 6 and 3(4) - relay output terminal.
4
5
6
2
3
+
RELAY
RELAY
BASE
* Switch on power,the indicator should flash once every about 5s;
* Use magnet to attract inner pole reed pipe on the opposite
position of indicator;
* After the indicator flashes twice to three times, it should always
light;
* If the indicator doesn't always light, please check if the magnet
using is correct.
1. Test it at least once a week.
2. Clean the smoke alarm at least once a month. Gently vacuum
off dust using vacuum's soft brush attachment;
3. Never use water, cleansers to clean your smoke alarm since
they may damage the unit.
It can only tell us that fire will occur so that you can deal with the
fire in time and have more time avoiding great loss.
It is not safe absolutely, because it can not detect smoke
absolutely, during smoke appear if there is block to obstruct
smoke or smoke is taken off by air current, smoke will not reach
the smoke alarm.
It is not fire extinguisher and also can not sense fire, so you
should have the fire-fighting devices to help.
Dial telephone to the fire control office.
Don’t feel panic, keep calm. Go through the route way
planned in advanced and leave As quickly as possible, don't
waste much time to take things.
Feel whether the door is hot or not. If hot, don't open the door;
if not, you also should revent the flame in and you can choose
other route way to flee.
With wet towel cover your mouth and nose, don't inbreathe
smoke.
After fleeing out ,gather in the indicated place and ensure
person is not injured or dead.
CONNECTION-WIRE DIAGRAM
CONNECTION-WIRE DIAGRAM
TEST
TEST MAGNET(ATTRACT ON
THE OPPOSITE POSITION
OF THE LED)
INDICATOR
REGULAR MAINTENANCE
LIMITATION OF SMOKE ALARM
WHAT TO DO WHEN FIRE OCCUR
