GETTING CONNECTED
STEP
3
STEP
1
Before installing the DStv WiFi Connector, ensure that your
internet router is switched on and connected to the internet.
STEP
2
� Press the blue DStv button on your DStv Explora remote
� Scroll to Settings
� Select System Settings
� Select Connectivity Set-up
Connect the cable on the docking station to the USB port
on the back of your DStv Explora (if your Explora has a
USB port on the side, don’t use that one).
Insert the DStv WiFi Connector into the docking station
and place the docking station next to the decoder.
The DStv WiFi Connector can also be connected directly to the USB port
on the back of your decoder, however this may impact signal reception.
The LED on the DStv WiFi Connector should now be
solid white (confirming that it has power).
STEP
4
QUICK
TIPS
STEP
5
If your WiFi network has a password, enter the password now.
STEP
6
The DStv Explora will now automatically test connectivity to the
internet.
The DStv Explora will now automatically search for WiFi networks
and display the available options. Press OK on the remote to
select your WiFi network, then press OK again to connect the
DStv Explora to your WiFi network.
I
f your WiFi network is not found, move the docking station to a position where it is most
likely to receive a WiFi signal.
If your WiFi network is still not found, check that your router is switched on and
connected to the internet.
If the name of your WiFi
network changes, or
the password is reset or
you need to check the
connectivity of your DStv
WiFi Connector, simply
repeat Step 2.
Data charges apply when connecting the DStv Explora to the internet ● Uncapped connection
recommended ● Visit dstv.com/GetConnected for more information, including Terms and Conditions
YOU’RE NOW READY TO DISCOVER & ENJOY EVEN MORE
ENTERTAINMENT ON YOUR DStv EXPLORA!
Scan this QR code to see
a video with step-by-step
instructions on how to
connect your DStv WiFi
Connector to the DStv
Explora.