www.dst-tec.com
DREAM SOURCE TECHNOLOGY CO.,LTD
Charging steps
1) Plug
the
USB
charging
cable
into
the
5V
charger.
2) Insert
the
Mico
USB
charging
cable
into
the
FPV power supply box
charging
connector
.
3) The
red
light
indicates
that
it
is
charging
,
the
green
light
indicates that the
battery
is
full
.
Precautions for use of power supply box
When charging, you must place the FPV power supply box in a dry and ventilated
place, away from heat source and flammable and explosive items.
When charging, you must shut off the power box switch first
，
then
remove the
power supply box from FPV goggles. The process of charging must be watched
to prevent accidents.
When you just finish using FPV goggles and the surface temperature of the built-
in battery is uncooled, please do not charge it immediately, otherwise it will cause
the battery to bulge
or a fire.
Before charging, please ensure correct polarity.
In the charging process, avoid fall and external shock, otherwise it will cause
internal short circuit of the battery and danger.
When charging is completed, please pull out the USB charging cable in time,
away from the high voltage power supply.
To
ensure
the
safety
of
your
use
,
please
do
not
disassemble
and
modify
the
power
box
.
11.Precautions
For optimal performance, please choose channels with minimum interference.
Before use, please debug the effective range of image
transfer and remote
control. Some receiving ends will be interfered by the electronic
transmitting/receiving components around, so try to keep enough space in order
to prevent mutual interference.
Ensure there is no obstacle between the transmitting antenna on the aircraft and
FPV goggles, and make the antenna away from the body as far as possible.
Beginners should fly in the familiar and larger space, to ensure safety.
7