S S
Digital witching ystems Australia
S
S
A
D
Dip Switch Configuration
Voltage
Daytime Running Light Trigger Setting
General Input Selection
General Input 1 Selection
General Input 2 Selection
Door Switch Selection
Park Brake Selection
Work Light Selection
Hi Beam Selection
O
N
O
N
O
N
Switch to Left
Switch to Right
Note: Red LED lights up when the DIP switch
is switched to right.
Name
Description
Switch to Left
Switch to Right
Voltage
+24V/+12V Selection
12V
24V
Daytime
Running
Light Trigger
Setting
Select to control Daytime
Running Light using Battery
Voltage OR Ignition Switch
Voltage Sense
For 24V System: turn
on (5s delay) at 27.4V/
turn off (20s delay) at
26.8V
For 12V System: turn
on (5s delay) at 13.7V/
turn off (20s delay) at
13.4V
Ignition Sense
Turn on (5s
delay) when
Ignition Switch
is ON
Turn off (20s
delay) when
Ignition Switch
is OFF
General Input
Selection
When the Park Brake is
Released Switch Off General
Output 1/2
Disabled
Enabled
General Input
1 Selection
Select General Input 1 to be
Momentary STB or STG
STG (Negative
Switching)
STB (Positive
Switching)
General Input
2 Selection
Select General Input 2 to be
Momentary STB or STG
STG (Negative
Switching)
STB (Positive
Switching)
Door Switch
Selection
Select Door Switch Input to be
STB or STG
STG (Negative
Switching)
STB (Positive
Switching)
Park Brake
Selection
Select Park Brake Input to be
STB or STG
STG (Negative
Switching)
STB (Positive
Switching)
Park Light /
Ignition
Switch
Selection*
Select Work Light / Ignition
Switch Input to be STB or STG
STG (Negative
Switching)
STB (Positive
Switching)
Head Lights
Selection
Select Head Lights Input to be
STB or STG
STG (Negative
Switching)
STB (Positive
Switching)
* Depends on Daytime Running Light Trigger Setting, Input 5 would be operated as Park Light OR Ignition Switch
