DSS Eurocom series, Руководство пользователя

Страница: 14 / 40

T e r m i n a l U s e r G u i d e
10
4a. Enter required feature information
If when selecting a
feature more
information is required,
then the top row of the screen will show the prompt for
the required information, while the bottom of the
screen will show a colon (:) like the screen oppposite.
Here the requested information may be entered if the
area is blank, as above, followed by the
key to enter.
4b. Cycle through feature options
If an option is
displayed, as in the
screen display opposite, then the option can be cycled
through with the menu left and right keys. The
key
selects the currently displayed option.
5. Send command
When programming
has finished then there
will be one final chance
to cancel the operation. The left menu key will send the
code, other wise the right key will cancel if you have
made a mistake. The programming code will be
displayed on screen while it is sent unless this option has
been disabled with the 'Hide Command strings' option
in the 'Terminal' menu. After the code has been sent,
confirmation or error tone will sound depending on
whether the operation was successful or not. Note that
settings in the 'Terminal' menu will not send codes but
take immediate effect as these menu items affect only
the terminal.
Ñ
Ñ Ñ
Ñ
INFO REQUESTED
Ò
Ò Ò
Ò
enter information
Set divert all
Ext:
Ñ Ñ Ñ Ñ
INFO REQUESTED WITH OPTION
Ò Ò Ò Ò
/ select option
Set divert delay
:10 sec. delay
Ñ Ñ Ñ Ñ CONFIRMATION
/
ERROR
TONE
Ò
Ò Ò
Ò
Send the command ?
Yes No