*
*
network broadcasting system
3
2.2 Remote Control Diagram
Remote Control structure is shown on the right:
1
．
Muting button.
2
．
Number button:
Set parameters for IP address.
3
．
F5:
Press F5 to start/ stop when plugging
in USB Flash Drive.
4
．
Last song selection button:
CH+ for selection of the last of the
current programme.
5. Volume decrease button:
V- for decrease of the output volume of
the terminal.
6
．
F7:Play/ Pause button:
Press the button repeatedly to switch
between on-demand and pause.
7
．
Enter Key:
Press Enter button in the idle state to
adjust the output.
Bass component (0 to 15 cycles), in
other states, press Enter button as the
cancel key.
8
．
Nex song selection button:
CH- for selection of the next of the
current programme.
9
．
Cancel button:
Press Cancel button in the idle state to
adjust the output.
Treble component (0 to 15 cycles), in
other states, press Cancel button as the
cancel key.
10
．
Volume increase button:
V+ for increase of the output volume of
the terminal.
11
．
F3
:
IP address access/ alter button. First
press to access into it, the second press
on CH+/CH- to select the parameters,
another press F3 into setting, and press
Enter button to preserve after altering,
otherwise in valid. Press Cancel button
to drop out without saving.
12
．
F1:Volume setting button:
Select the sound source requiring for
alteration. Press V+ and V- to alter after
selection. (AUX1 is auxiliary input,
MIC1 is MIC input and MP3 is network
sound source or USB Flash Drive)
13
．
Sleep button
Pic. (1)
1
8
13
2
3
4
5
6
7
12
11
10
9
