*
Fire-fighting/public addressing system
Series PC10
9
(C) Remote-control operation
1.
This machine is subject to the remote control by PC. By connecting the remote link port to the
remote link port of other equipment with the network table, it is possible to operate and control by
means of the computer installed with the control software of this system. The network cable is the
T568A-T568A network cable as shown in figure (D). Please refer to the operating instructions to the
PC software for the monitoring operation of PC. If PC monitoring is not necessary, do not connect.
If the PC1005U router is connected in the system, first connect the data output port “DATA OUT” of
PC1005U to the data input port “DATA IN” of this equipment first, or connect the output port
“DATA OUT” of PC1005U to the input port “DATA IN” of other equipment, and then connect to this
equipment. Afterwards, connect the other equipments one by one in series. All the network cables are
connected by the method for T-568A ~ T-568A network cable. The connecting method is as shown in
the following figure.
PC1011PII Peripheral equipment Peripheral equipment
2. If there is no PC1005U in the system, the “DATA” port of the machine is used only to transfer the
data signal between the peripheral equipments. Please connect the “DATA” port of the equipment to
the port “DATA” of the other equipment in series. The connecting method is as shown in the
following figure:
Local machine or other
peripheral equipments
Local machine or other
peripheral equipments
Local machine or other
peripheral equipments
Connect remote control
ports of all the machines
in series
Connect remote control
ports of all the machines
in series
PC1005 DATA OUT
port from the router
DATA OUT port
from other
equipment
Connect remote control
ports of all the machines
in series
DATA OUT port
from other
equipment
