*
*
Network PA System
2
2.
Description of Appearance
2.1 Front panel
STBY
Net Service
Timing
Signal
100V Backup
Protect
VOL+
VOL-
Set
F1
USB
100V Network Terminal
MAG6701
1 2 3
4 5 6 7 8 9
10 11 12 13 14 15 16
1
button
U disk playing mode: to play previous song.
IP setting mode: move left/move right to view/set
parameters.
2 Play/Pause button
To control play/pause of local MP3 program
playback. When setting address, this button is
used to save the settings.
3 Network indicator (Net Service)
When this device is successfully connected to
host through Network, this indicator will be
turned on.
4 Timing indicator (Timing)
This device could execute timing function
without host control. When executing, indicator
will be turned on.
5 Amplifier output level indicator (Signal)
This indicator will be turned on when there is
signal output from this terminal. This indicator
will be brighter when increasing volume and it
will be darker when turn down volume.
6 USB button
U disk play/pause button. When setting IP, this
button could be used to exit setting status.
7 F1 button
Use when adjust volume. This button could be
used to switch among AUX IN, MIC IN/MIC 2,
and MP3.
8 Local setup button (Set)
Long press this button to enter IP address view
status. Press again to enter IP setup/modify status.
9 VOL- button
Play mode: to turn down volume.
View IP: to select parameter to be viewed.
Set up IP: to increase or decrease parameters.
10 Amplifier protection indicator
Pic. (1) Front panel
