*
LY
*
Multi-room Music System
11
A stored station can be directly called by a line or IR remote controller. For details, refer to
functions of remote controller keys.
5.
Timer Programming
Press the “TIMER” key on the panel to access system setting status, and the display will show the
“Operation options” interface (as shown in Fig. 5-1 in the next page), where options like timer
setting, time setting, IR teaching, copy schedule, and system setting can be selected.
5.1
Timer setting
Turn the digital wheel to highlight the “Timer setting” option, and press it again to access the timer
setting interface (as shown in Fig. 5-1-1 in the next page). Turn the wheel to select an option in the
timer setting interface for operation.
5.1.1 Weekday setting:
Turn the digital wheel to highlight the “Weekday” option and press it again, and a icon will be
shown. Turn the wheel to select a weekday (e.g. Wed), and press it again to apply and exit.
5.1.2 New schedule:
When the weekday in the “Weekday” option is set as a weekday (e.g. Mon), all information of the
first schedule of the day will be shown in the other options of the interface. In case that other
options shows nothing (as shown in Fig. 5-1-2) (
Next page
), no schedule is set for this day. To
create a schedule, select the “New” option and set other options of the new schedule. The new
schedule is always assigned to the last schedule number of the day. However, schedules are
executed according to their set time.
5.1.3 Number setting:
Turn the digital wheel to highlight the content in the box following the “No.”, and then press down
the wheel once to show the icon. Turn the wheel to select, and press it again to apply and exit.
5.1.4 Power setting:
This option is used for timing of power output socket on the rear panel (as described in item 17 in
page 4), which supplies power AC220V to other devices. In case that the power setting is set as
“On”, power is supplied from the socket at the scheduled time; in case that it is set as “Off”, no
power is supplied from the socket at the scheduled time; in case that it is set as “…”, the default
setting (i.e. the previous setting) applies. Setting can be done in the same way as the “No.” setting.
5.1.5 Time setting:
This option is used to set the starting time of a schedule, which is accurate to a second and uses
24-hour system. Setting can be done in the same way as the “No.” setting.
5.1.6 Setting of scheduled MP3 tracks
