background image

Matters needing attention

Please read the following before operating the product.

Warning

The following basic requirements must be strictly observed, to avoid potential personal injury and

equipment or property damages to you or any person nearby. The basic requirements include without
limitation to the following:

Power source/power cable

Please disconnect the device from power source by

pulling the plug other than the power cord. Pulling the
power cord may result in damages.
• Please keep the power cord away from heat source.
Do not overbend the power cord or place it anywhere
it can be stepped on or may cause to trip.
• This is connected to power source via the plug and
any failure or danger occurs, the user can disconnect
the device from power source by pulling out the plug
out from the socket, therefore, it is required that the
power socket should be located somewhere with easy
access.
• The device is not completely disconnected from
power source when it is switched "OFF". For sake of
safety, please disconnect the device from the socket if
it is not in user.

Positioning

• Please disconnect the device from power source
before relocating the device.
• For avoiding deformation of panels and damages to
internal components, please do NOT place the device
where there is heavy dust or violent vibration, or
where it is extremely cold or hot.
• Please keep this device off water drops or splash or
vase filled with water or any other articles of similar
nature.

Connection

• Please disconnect other equipment from
power source before they are connected to this

product. Please tune volume to its minimum level
before the device is powered ON or OFF.
• All terminals on the device marked with

are live

and dangerous, and should be connected by trained

personnel.

When abnormal conditions are realized

• Please disconnect the device from power source
immediately in case the power cord is worn or
damaged or if the sound is suddenly cut off or any
abnormal odor or smoke comes out from the device,
and then have the device inspected and repaired by
professional personnel.

Precautions in Operation

• Please do NOT insert any finger into any gap or
opening of the device.
• Please prevent foreign objects (paper, plastics or
metal etc.) from being inserted or falling into any gap
or opening of the device. In such case, please cut off
power source immediately.
• Please do NOT put the body or any heavy object on
the device and do NOT operate the buttons or
switches or connections with excessive force.

Do NOT open

• Please do NOT remove the cover of the equipment,
otherwise you may get an electric shock.
• Do NOT attempt to remove any internal component
from the device, or to modify the equipment in
whatever manner. In case of any abnormal condition,
please stop using the device immediately and have it
inspected and repaired

by professional personnel.

Other Precautions

• Our company shall not be responsible for data loss
or damages due to improper use of unauthorized
modification to the device.
• The images and screen display in this Manual are
only for description and may be different from
screen images in actual operation. The screen
display depends on the product.

Содержание DA2125











Отзывы: