DSPeaker ANTI-MODE 2.0 DUAL CORE, Руководство пользователя

Страница: 10 / 32

A
NTI
-M
ODE
2.0 D
UAL
C
ORE
O
WNER
'
S
M
ANUAL
PLEASE NOTE : After Anti-Mode gets rid of the room resonances,
the results may appear good but lacking some bass. One possible
reason is that the listener has grown used to the exaggerated bass
response previously caused by room resonances.
If you feel the need to increase the overall bass level, you can do
this using the house curve tool or designing a custom EQ to lift the
low-frequency band. You can also use a QuickTone bass adjustment
or adjust the
Compensation
value from the
Audio Settings
menu.
After you have run the calibration once, you can view the before and after
measurements from the
Room Response
(
Measurement
) menu. You can use the same
menu to make and view your own room response measurements.
3.Home Screen View
The default home screen view consists of three components. The currently active input
is displayed at the center.
Similarly, the currently active output is shown at the bottom of the screen.
The top of the home screen shows state information. The icons are from left to right:
(1) Input sample rate (in kHz)
(2) Input bit depth (when available)
(3) House curve indicator
(4) Tilt curve indicator
(5) Lowpass or highpass indicator
(6) Custom EQ indicator
(7) Infrasonic filter indicator
(8) Speaker configuration indicator
Rev. 1.0 2013-06-04 Page 10 (32)