rest on the coil below there is a chance they will hang up on the
coil below and not drop
down.
6.
The prize motor does not turn, or it turns the wrong way when I win a
prize.
a.
Look on the back of the playing field and make
sure that the wires are connected to the motor
correctly and to the main circuit board.
7.
The prize motor does not stop when a prize falls.
a.
Check the wires on the two boards attached to the prize box. Make
sure they are connected. Also, make sure the optic sensor wires
are connected at the main board. If this does not solve the
problem, make sure the sides of the prize box are absolutely
straight.
8.
The Advance button or the Select A Prize button are not working.
a.
Make sure the wires are connected to the switch on the button as
well as at the main circuit board.
9.
How do I change the button light bulbs?
a.
Twist the switch counter-clockwise and pull the socket out. The bulb will
just pull out and you can push another one in.
10.
How do I change the front fluorescent bulb?
a.
Make sure that the power is turned off
to the game before changing the
bulbs. On each side of the light fixture is one wing nut. Loosen this wing
nut and slide the whole fixture toward the prize coils. You can then
change the bulbs (Use F20 T12, 24” bulbs) with ease and slide the fixture
back into place. Tighten the wing nuts when finished.
11.
How do I change one of the nine TIC TAC TOE circuit boards?
