System Installation
96M4311o User’s Manual 3-3
3.2 Main
Memory
The 96M4311o
provides 2 x 200-pin SODIMM sockets (dual channel) support 1.8V
DDR2-SDRAM as on-board main memory. The maximum memory size can be up to
2GB. Auto detecting memory clock according to BIOS CMOS settings.
JP2D: DDR2 memory frequency selection
JP2D
Function
9-10 open
11-12 short
The memory module is DDR2 400
Ì
9-10 short
11-12 open
The memory module is DDR2 533
Memory frequency / CPU FSB synchronization
The 96M4311o
support
s
different memory frequencies depending on the CPU
front side bus and the type of DDR II SODIMM.
CPU FSB
Memory Frequency
533MHz 533/400MHz
400MHz 400MHz
JP2C: PCI-E x16 graphic port enable/disable
The 96M4311o
support
s
PCI-E by 16 Slot, for PCI-E by 16 VGA Card.
JP2C
Function
7-8 short
Reserved
7-8 open
PCI-E x16 graphic port enabled
Ì
3.3
Installing the Single Board Computer
To install your
96M4311o
into standard chassis or proprietary environment,
you need to perform the following:
Step 1: Check all jumpers setting on proper position
Step 2: Install and configure CPU and memory module on right position
Step 3: Place
your 96M4311o
into the dedicated position in your system
Step 4: Attach cables to existing peripheral devices and secure it
