BIOS Setup Information
96M4011o User’s Manual
4-22
Resource Controlled By
BIOS can automatically configure all the boot and plug and play compatible devices.
If you choose Auto, you cannot select IRQ DMA and memory base address fields,
since BIOS automatically assigns them.
The choice: Auto (ESCD), Manual.
IRQ Resources
When resources are controlled manually, assign each system interrupt a type,
depending on the type of device using the interrupt.
The choice: Press Enter.
IRQ-3/IRQ-4/IRQ-5/IRQ-7/IRQ-9/IRQ-10/IRQ-11/IRQ-12/IRQ-14/IRQ-15
assigned to.
The choice: PCI/ISA PnP, Legacy ISA.
DMA Resources
When resources are controlled manually, assign each system DMA channel a type,
depending on the type of device using the DMA channel.
Enter for more options DMA-0/DMA-1/DMA-3/DMA-5/DMA-6/DMA-7.
The choice: PCI/ISA PnP, Legacy ISA.
PCI/VGA Palette Snoop
Legacy ISA for devices compliant with the original PC AT bus specification,
PCI/ISA PnP for devices compliant with the plug and play standard whether
designed for PCI or ISA bus architecture
The choice: Enabled, Disabled.
Assign IRQ For VGA
To enable VGA IRQ assignation by selecting enabled.
The choice: Enabled, Disabled.
INT Pin 1 Assignment
Devices (S) using this INT: Display Cntrlr – Bus 0 Dev 2 Func 0 USB 1.0/1.1 UHCI
Cntrlr – Bus 0 Dev29 Func 0.
The choice: Auto, 3, 4, 5, 7, 9, 10, 11, 12, 14, 15.
