
14 |
P a g e
014010-001 Rev 01
©2019 Data Sciences International.
CIGARETTE TIME
The Cigarette Time setting specifies how long the smoke machine should smoke each cigarette (Fig 17). Depending
on the length of the cigarettes being used and other atmospheric factors, this time may need to be adjusted. This
setting can range from one to ten minutes in fifteen second increments. If using a regular cigarette, the ideal
smoke time should be set so that approximately ¼” or 6mm of tobacco is left on the cigarette. This allows for
deviations in manufacture of cigarettes and prevents the burning of the filter elements.
Figure 17
Use
the Up/Down arrows to choose the desired setting and press OK. Note: This setting can be changed “on the
fly”. While the ember unit is smoking cigarettes the time remaining will periodically be displayed on the screen.
Pressing up/down will add/subtract 15 seconds to the time remaining. It is useful to watch the first cigarette and
make the necessary adjustments to the smoke time in order to produce the best results for the remaining,
unsupervised cigarettes.
SMOKE PUMP
This function is not usable on the Individual Cigarette Puff Generator. Do not enable the Peristaltic Pump option or
else the internal lung and actuator mechanisms of the unit will be deactivated.
WARNING: If the Peristaltic pump option is enabled, the unit will not work.
ECIGARETTE MODE
The eCigarette mode should never be disabled on the Individual Cigarette Puff Generator, even for regular
cigarettes.
WARNING: If the eCigarette mode is disabled, the unit will not work.