DSG Technology Blaze 1200 Series, Быстрое руководство по установке

Страница: 2 / 20

2
Follow the steps below for installing and configuring Blaze Server.
1. Connecting to Power Cord
Plug one end of the power cord to the power connector on the rear panel of Blaze Server. Plug the other
end of the power cord into a power outlet.
2. Connecting to LAN
You need to connect Blaze Server to your existing Ethernet network. Connect an Ethernet cable from the
“Network” RJ45 port on Blaze Server to any 10/100BaseT RJ45 port on a switching hub.
3. Connecting to CO Lines or Extension Lines
With Blaze Series, the Server is integrated with Voice Gateway module. Voice Gateway supports CO
line or analog extension modules. Please plug a CO line to a CO Line port or plug an analog extension
to a SLT port.
4. Preparing a Computer
Prepare a computer with web browser and be sure it is on the same subnet as of your Blaze Server.
Change the computer’s IP settings if necessary. The suggested web browser is Internet Explorer version
5.0 or later. The default values of Blaze Server are as follows:
Default IP Address: 192.168.1.200:88 (The service port is 88)
Default Gateway: 192.168.1.254
Default Subnet Mask: 255.255.0.0
5. Login Blaze Server
Launch the web browser. On the address bar, type in the Blaze Server’s default IP address
“http://192.168.1.200:88” to access Blaze Server. When connected to Blaze Administration Website,
click the Administrator icon.
When you login the Blaze Administration for the first time, please assign your Login name and
password. The password shall not exceed 8-character alphanumeric. The user name and password are
case sensitive.