7
Protocols and Interface
•
Complete USB ADSL modem solution
•
Compliant with ADSL standards
Full-rate ANSI T1.413 Issue 2 and ITU G.dmt (G.992.1) standards
Splitterless ITU G.lite (G.992.2) specification
•
DMT modulation and demodulation
•
Full-rate adaptive modem
Maximum downstream rate of 8 Mbps
Maximum upstream rate of 1 Mbps
•
Supports splitterless ADSL implementation
•
Supports Dying Gasp
•
WAN mode support
PPP over ATM (RFC 2364)
PPP over Ethernet (RFC 2516)
•
LAN mode support
Bridged/routed Ethernet over ATM (RFC 2684/1483)
Classical IP over ATM (RFC 2225/1577)
•
Tone detection for low power mode
•
ATM SAR performed in software driver
•
USB host interface
Compliant with USB Specification, Revision 1.1
USB Full Speed (12 Mbps)
Suspend/Resume
Vendor specific descriptors
Bus powered USB device
Please note that at the time of printing,
Telecom NZ only supports PPPoA (RFC2364)
. Even
though this modem supports many other protocols, you will not be able to use them until Telecom NZ
supports them. If Telecom NZ decides to support a new protocol, we will endeavour to post the
correct settings for the modem on our website
http://www.dse.co.nz
.
Bus Type
•
USB Type B connector
Cables & Connectors
•
1 RJ-11 cable & 1 Type A/B USB cable
Physical Description
•
Dimensions: 127mm (L) x 75mm (W) x 1.6mm (H)
Temperature
•
Operating
0°C ~ 50°C
•
Non-operating 20°C ~ 70°C
Humidity
•
Operating
20%~80% RH
•
Non-operating
20%~80% RH
Status LED
•
1 LED indicates Transmit/Receive data
•
1 LED indicates Power
