USER MANUAL
SPEED DOME CAMERA SD-Dxxx Series II
Page:
16
Page:
16
WWW.DSE.EU
•
PATROL NUMBER - Select the number of the TOUR to be programmed (1 to 16).
•
September PATROL - Lets you choose presets that make up the tour and set the
time spent on each. With the IRIS + command you save programming
•
RUN PATROL - Allows you to start a tour
•
THE PATROL - Allows
cancel
Configuration of a tour.
Task Timer
This part of the menu allows you to program automatic functions based on time of day. E
'can program up to 8 timed actions.
CAUTION: This function is currently not available because the camera does not have a
CAUTION: This function is currently not available because the camera does not have a
battery capable of preserving the current time.
For each program you set the start time and end time, then you choose the automatic
function to be executed (preset, tour, etc.) and the number of the function.
You can program the following functions: PTN (pattern), PRE (preset), RSC (360 ° scan),
ASC (autoscan between limit switches), PAT (patrol / tour)
Pattern Function
This camera is able to record a sequence of operations performed by the user, such as
displacements,
zoom etc. for them
rerun
automatically. These stored sequences are defined PATTERN. The camera allows you to
record 8 pattern.
•
PATTERN NUMBER - The number of the pattern to be programmed (1 to 8)
•
EDIT PATTERN - By choosing this option you start recording the sequence of
customized movements. When finished with IRIS + you save the regsitrazione.
•
RUN PATTERN - Allows you to run a csleta pattern (1..8)
•
THE PATTERN - Delete a stored pattern
Display information
This section allows you to define what information to display overlays in the camera's
video signal.
•
SYS TIME -
Now the camera
SYS TIME -
Now the camera
•
SYS POSITION -
Position coordinates
SYS POSITION -
Position coordinates
•
START INFORMATION -
startup Information
START INFORMATION -
startup Information
System default
This section allows you to restore the factory configuration.
