DSE RY Series, Руководство по установке, Страница: 21 / 57

INSTALLATION MANUAL
RY SERIES - IP CAMERAS ANPR
Page:21
DSE SRL - ITALY - WWW.DSE.EU
distance. You have 13 levels of LED brightness (1..13). If the plate is shot closely, below 10 m. for
example, it may be convenient to reduce the brightness of the LEDs to prevent it from being too
bleached.
To adjust the lighting correctly, place yourself in real dark conditions and lights on by positioning
a stationary vehicle at the license plate reading point. If the plate is bleached with illegible
characters, it is necessary to reduce the power of the LEDs.
CORRECT LED POWER
EXCESSIVE LED POWER
CDS START- For a good reading of the license plates in the dark it is necessary that the front IR
LEDs light up in night mode. Here you can set the activation threshold of the IR LEDs from 1 to
10 according to the night lighting of the environment. If you set a low value, the LEDs will turn on
earlier. With a high value, however, it will have to be darker for the LEDs to light up.
By reducing this setting to low values you can compensate for the presence of any light sources
near the camera which, by preventing the LEDs from turning on, prevent a good night reading of
the license plates.
CHECK MODE- This parameter relates to the HSBLC function for the suppression of headlight
glare which has been described above. If you leave the factory setting CHECK MODE ON, the