
INSTALLATION MANUAL
RKK SERIES - POE CAMERAS / NVR KIT
Page
: 32
Check the network parameters
of your NVR
Your NVR automatically configures itself on the network (DHCP), then directly receives the network
address and configuration from your router. You don't have to worry about entering any parameters.
However, before connecting remotely with PCs and mobile phones, it is good to check the network
situation. To do this, follow these instructions
1 - ACCESS THE NVR MENU
Right click and
choose MENU To access you will need to log
in Enter the factory password:
USER: admin
PASSWORD: 12345
2 - OPEN THE NETWORK WINDOW TO CHECK THE IP ADDRESS
Click the SYSTEM CONFIGURATION icon (top gear) and then CHOOSE TCP / IP Find all the network
parameters of your system
In this window check that the checkbox on ENABLE DHCP is active and take note
DSE SRL - ITALY - WWW.DSE.EU