Document:
RE-0D8 BCC5M
Document:
RE-0D8 BCC5M
Update:
April 2008
Update:
April 2008
Page:
2
Page:
2
OWNER'S MANUAL
RE-BCC5M waterproof camera with IR
a shop behind a very bright outside. By setting
the
parameter to ON
skills
there
backlight compensation. E 'can choose:
BLC AREA - Here it is possible to set the image area on which it will operate the backlight
compensation, ie the area where the image will be present to highlight the subject compared to
the background. The camera,
regardless of the brightness of the
background will try to optimize the viewing area selected. The yield accurate adjustment by the
presence of 64 selectable panes. The BLC area adjustment lets you use the backlight
compensation even with subjects that are not found in the middle of the recovery. To set the BLC
area, select the box and set it to yellow (ON) or orange (OFF). The selected area will be opaque
and should be done so that it coincides with the area where it will appear dark subject against
bright background. Once set to the desired area and press ENTER (center button) for about 2
seconds and select: EXIT to exit or ALL CLEAR to cancel all panels, or ALL SET to enable all
panes.
BLC RATIO - Sets the level of compensation. The higher the level the more it will improve
the vision of the subject and penalized the vision of the bright background.
After the selection RETURN to return to the main menu.
AGC - Automatic Gain Control
In this section there are the options related to the automatic gain control (AGC), which optimizes
the vision in low light. Once you set the parameter to ON you can set the automatic gain control.
Most AGC will mean more brightness in dim light, but also more noise in the image due to
amplification of the signal.
White Balance - White Balance
The white balance is an important function to make the white color of the image always such in
any type of lighting. Are available
the following
options:
ATW - Selecting ATW you enable automatic balancing
AUTO TRACKING,
recommended
in
most applications, which by monitoring the continuously balancing provides the best fidelity
possible white.
AWB - Selecting AWB instead enables the conventional automatic balancing that against
offers for a reaction rate higher than the change of the type of lighting.
FIXED - E 'can selzionare 4 fixed balancing mode MODE 1 ... 4
MANUAL - With the manual white balance setting can be changed to the desired levels of
red and blue image from 0 to 255.
Function - Special Functions
Selecting "functions" to access the following submenu:
The following functions are available:
CAMERA ID - this enabled, you can type a description of max. 15 characters that will be
reported
in the image-imprinted
camera. Choose the ENTER symbol to confirm. Choose the C symbol to delete all letters. IS'
You can also choose
the position of the
overlay. Select RETURN to exit.
MIRROR - You can flip the image horizontally in the case of retrospective shooting.
DAY NIGHT - This section
sets the
operation of a day / night camera features. E 'can set the option COLOR (if color camera), B / W
(always B / W camera with selectable BURST option) or AUTO. In the option AUTO the camera
will resume daytime color and B / N with insufficient light. E 'can set the activation time for the B /
W (Start / End) and the response delay (DELAY)
MOTION DETECTION - The camera is used to indicate any variations of the image
resulting from an intrusion. Upon the occurrence of the intrusion will appear a signal in the upper
right of the image. Selecting the Motion option to ON enables the detection of the movement. You
can set the detection area (AREA) in the same manner already seen for the BLC,
there
the detection sensitivity (MOTION TH.) as well as the display of the detection window in case of
intrusion (MOTION TRACE). During
the alarm
motion detection can not be combined other alarm actions
over
a
display
to
screen
described above.
Privacy - masking sensitive areas
This section serves to mask viewing zones, usually to protect privacy. E 'can set 4 mask areas by
selecting the size and color.
Range
E 'can manually set the correction level range from 0.05 to 1
Adjust - Image Adjustment
Here you have the image adjustment options
CONTRAST - Contrast Adjustment SHARPNESS - Adjusting
CB-GAIN definition - color adjustment BLUE CR-GAIN - color
adjustment RED
Language
Available only in English menu to be selected by repeatedly pressing the RIGHT button on line 8
of the on-screen menu.
Reset
Restores the camera's factory settings
Exit
To exit and confirm your settings.