7
UM-HDRM(G) 4/17
LCD DIsPLAY sAFeTY
It is recommended Users adhere to personal safety in the instance the HDRM display
screen should be shattered. Aside from obvious glass shards, the fluids in the LCD are a
known skin irritant.
eLeCTrICAL
product has been engineered to meet or exceed international industry standards
addressing product design and enclosure protection against EMI/RFI.
LCD AND eLeCTrICAL sAFeTY
fLuIDS fROM LCD DISpLAY
• If Display should become shattered, do not touch fluids from LCD Screen
• If fluid should get on hands or clothing, immediately wipe off with liquid soap
or rubbing alcohol on a clean towel; wash with water; immediately consult with
a doctor, and
• If fluid gets in the eyes, flush eyes immediately with water for a minimum of
15 minutes; immediately consult with a doctor.
EMI/RfI
CoNNeCTING CAbLes
• Disconnect power to computer when Display is being installed
• Upon installation, verify power input connector is securely seated on Display
• position power cable so it is not in contact with hot surfaces
• Do not allow anything to rest on power cable, and
• protect power cable from extreme heat sources.
Power soUrCe
• Always connect to a properly grounded DC (standard) power source
• Any equipment to which Display is attached must also be connected to prop-
erly wired and grounded power sources
• Operational voltage is 10 - 36 vDC (Input is 12, 24, 28 vDC nominal), and
• power Consumption is: 40 watts maximum.
HDRM power consumption is listed at 40 watts maximum.
pOWER CONSuMpTION
Should a product be retired, dispose responsibly through a technology
electronic (E-waste) recycler.
DISpOSAL
