DSE DS-N4, Руководство по установке

Страница: 25 / 82

INSTALLATION MANUAL
DS-N4 - HD-SDI Video
Page: 25 Page: 25
DSE SRL - ITALY - WWW.DSE.EU
In this table you define the actions to be performed subsequently to the alarm of the sensor
DELAY - Shows the duration of the activation of alarm from 5 to 120 seconds. DELAY - Shows the duration of the activation of alarm from 5 to 120 seconds.
ALARM HANDLING - Defines actions to be taken in case of alarm activation. Pressing SETUP you have access to 3 cards ALARM HANDLING - Defines actions to be taken in case of alarm activation. Pressing SETUP you have access to 3 cards
BUZZER - Defines whether to activate the buzzer inside the DVR BUZZER - Defines whether to activate the buzzer inside the DVR
SHOW FULL SCREEN - Defines whether to automatically lead to full screen the corresponding camera in the entrance alarm SHOW FULL SCREEN - Defines whether to automatically lead to full screen the corresponding camera in the entrance alarm
TO ALARM OUT - Defines whether to activate the alarm output on the back of DVR TO ALARM OUT - Defines whether to activate the alarm output on the back of DVR
E-MAIL - Defines whether to send an email alarm message. E-MAIL - Defines whether to send an email alarm message.
TO RECORD - Define which cameras to record the alarm period TO RECORD - Define which cameras to record the alarm period
TO PTZ - Allows you to program the automatic movement of a dome camera in case of alarm. You can recall presets, tours and patterns TO PTZ - Allows you to program the automatic movement of a dome camera in case of alarm. You can recall presets, tours and patterns
3> Schedule
E 'can perform the alarm action only during certain hours depending on the day of the week.
The riquadrino blue means action enabled, the gray color means disabled action. In the top pane you choose the camera on
which to apply the programming. In the selection of time slots is supported dragging the mouse.
MOTION
Managing by motion detection alarms. The DVR can generate alarms based on the analysis of the images from the cameras if an
intrusion occurs in the visual field. This detection is known in the industry as CCTV Motion Detection. The page consists of two sections:
Motion and Schedule