DSE DR-N16, Руководство пользователя

Страница: 53 / 88

USER MANUAL
DIGITAL VIDEO RECORDER DR-N16
Page: - 53 - Page: - 53 - Page: - 53 -
DSE srl - ITALY - WWW.DSE.EU
The available commands are:
• ▲ ▼ ◄► ▲ ▼ ◄►
Press these buttons to navigate the menu.
• MODE
Accesses advanced settings RS232, not used on this model.
• ESC
Press this button to exit the current screen and return to the SETTINGS menu. If you submit a
confirmation Save screen, press
ENTER to exit and save, ESC to exit without saving. ENTER to exit and save, ESC to exit without saving. ENTER to exit and save, ESC to exit without saving. ENTER to exit and save, ESC to exit without saving.
Below is a brief description of each item and its specific actions:
• device type - PTZ or N / A ( Not used). Press +/- to change. Set the parameter of PTZ if you intend to device type - PTZ or N / A ( Not used). Press +/- to change. Set the parameter of PTZ if you intend to device type - PTZ or N / A ( Not used). Press +/- to change. Set the parameter of PTZ if you intend to device type - PTZ or N / A ( Not used). Press +/- to change. Set the parameter of PTZ if you intend to device type - PTZ or N / A ( Not used). Press +/- to change. Set the parameter of PTZ if you intend to device type - PTZ or N / A ( Not used). Press +/- to change. Set the parameter of PTZ if you intend to
use the RS485 port to control speed dome cameras connected to it.
• Template - Set the communication protocol to be used according to the connected cameras The Template - Set the communication protocol to be used according to the connected cameras The
DVR includes the protocol D and Pelco, Samsung SCC-641P. Press the +/- button to change the DVR includes the protocol D and Pelco, Samsung SCC-641P. Press the +/- button to change the DVR includes the protocol D and Pelco, Samsung SCC-641P. Press the +/- button to change the
protocol.
• Baud Rate - press +/- to vary the speed of the Protocol Baud Rate - press +/- to vary the speed of the Protocol
• Data Bit - press +/- to change Data Bit - press +/- to change
• Stop Bit - press +/- to vary. Stop Bit - press +/- to vary.
• Parity - ( Odd, Even, or None). Press +/- to change. Parity - ( Odd, Even, or None). Press +/- to change. Parity - ( Odd, Even, or None). Press +/- to change. Parity - ( Odd, Even, or None). Press +/- to change. Parity - ( Odd, Even, or None). Press +/- to change. Parity - ( Odd, Even, or None). Press +/- to change.
• ID DVR / Camera - The address to be assigned to the VCR in the RS485 BUS, must be different ID DVR / Camera - The address to be assigned to the VCR in the RS485 BUS, must be different
from those assigned to the cameras. Press +/- to change.
For instructions on how to set the communication parameters suitable for / and cameras by using
consult your camera manual. Obviously all the connected cameras, though of different models, will be
able to share the same communication protocol.