
INSTALLATION MANUAL
DM-WFC2 / 3 WFL1 - WIFI REMOTE CONTROLS
Page:9
DSE SRL - ITALY - WWW.DSE.EU
Configure the remote control
In order to use the remote control with your mobile phone, you must first connect the device
to your wifi network. It is an easy operation to perform, thanks to the APP you just
downloaded.
Note that on the electronic board there are:
1 button called PAIRING
1 red LED that can be seen transparently through the plastic
Locate them because you will need them in these operations
1 - Press ADD DEVICE
2 - Choose the type of device according to the following table
DM-WFC2 = SWITCH (WIFI) - Do not use the Zigbee version
DM-WFC3 = DOOR OPENER or SMART GARAGE DOOR OPENER
DM-WFL1 = SWITCH (WIFI) - Do not use the Zigbee version