
Document: DK-SP1-HDS 2I0
Page: 2
USER'S MANUAL
DK-SP1-HDS Camera with hidden video recorder
DSE srl - Digital Surveillance Equipment - www.dse.eu
Charging the battery
Before using the device, it is advisable to fully charge the
battery. To do this, connect the USB port of the DVR to
the computer or to a USB charger with the supplied cable.
Full charging takes approximately 12 hours depending on
the initial charge state. It is recommended that you
comfortably let the charging complete overnight.
Next to the USB socket there is a red LED that turns on
during charging and turns off when charging is complete.
Turn on the device
DK-SP1-HDS is equipped with a power switch located next
to the USB (4). When turned on the DVR does not emit
any visible signal except a red LED. It is necessary to act
on a smartphone and a tablet with the HDSmartIPC app to
use it.
Download HDSmartIPC and setup
DK-SP1-HDS has been developed to be remotely
controlled via wifi with a mobile phone or tablet.
It is not necessary to have a wifi network to use DK-SP1-
HDS as the device is factory supplied in ACCCESS POINT
mode and it generates a wifi network itself to which you
can connect with Android / iOS portable devices.
First you need to download the HDSmartIPC application
from Google Play or Apple Store, available for free for
Android and iOS.
To use the program, see the specific manual.
Once logged in with the app, you can intervene in the
configuration and connect the DVR to your wifi network.
All these operations are explained in the HDSmartIPC
application manual that you can download from the site.
Motorization
DK-SP1-HDS is a motorized camera. On startup it
performs a test rotation. You can check the movements
via the app
IR illumination
DK-SP1-HDS is equipped with invisible infrared
illuminators with a range of about 10 meters. They turn
on and off via the app.
Two-way audio
DK-SP1-HDS is equipped with a microphone for ambient
listening and a loudspeaker to speak and be heard in the
room.
Reset the DVR
If necessary, a RESET can be carried out by pressing the
reset button for 10 seconds with a deformed paper clip or
other thin object. After rebooting the DVR will return to
the factory Access Point mode.
Movie playback on PC
A computer and SD card reader (included) is required to
review and manage the files recorded by the DVR.
You have to turn off the DVR with the ON / OFF switch.
remove the micro SD card and insert it into a computer
SD card reader.
It is possible to copy the videos to the PC and play them
with any video player (VLC - VideoLan recommended).
ATTENTION: It is not possible to download the files
through the USB cable of the DVR because this is used
only for recharging / powering the device.
Main technical features
Sensor
CMOS
Maximum resolution
FullHD 1080p (1920x1080)
Frame rate
30 f / sec
Video format
MP4 (H264 compression)
Photo format
JPG
Overlay
Date time (not excludable)
Functions
Continuous recording
Motion recording
Timer recording
Live viewing only
WiFi control
Range 10 m.
Audio microphone
Incorporated
Audio speaker
Incorporated
IR illuminator
Invisible 10 m.
Video storage
About 300 hours on 128GB at
1080P
Operating
temperature
-5 ° + 40 ° C
Memory
MicroSD Class 10 or higher
Memory capacity
4..128 GB