Document:
DK-BK1-1I6
Document:
DK-BK1-1I6
Document:
DK-BK1-1I6
Page:
2
Page:
2
OWNER'S MANUAL
DK-BK1 camera with video recorder on the agenda
DSE srl - Digital Surveillance Equipment - www.dse.eu
Blue 3 flashes
Start continuous recording
Red 3 flashes
Start recording motion
Red or Blue 10 flashes
Missing SD card
Red and Blue 10 flashes
Low battery
Resolution / archive / overwrite
DK-BK1 is able to record audio and video in Full HD 1080P 1920x1080 @ 30
f / sec. 8 minutes recording occupy about 1GB of memory.
Obviously you
recommends using
recording on motion detection whenever possible in order to record only meaningful images and
not unnecessarily taking up memory when no action takes place in front of the lens.
Once exhausted the memory capacity of the micro SD card, the device will erase the recorded
files by overwriting the oldest new recorded files.
In motion recording, DVR records video lasting 1 minute. In continuous recording generates
consecutive files from 2 minutes.
Shooting Position
DK-BK1 recovers from a hole on the back straight which provides an image with the agenda as
placed on the shelf of a bookcase.
The angle is approximately 80 ° and is not adjustable for which it is necessary to find a suitable
position to provide a good angle of view.
Recording in motion detection with PIR sensor
The recording in motion detection is the most widely used because in this DK-BK1 mode records
only in the moment in which occurs a movement in the field of view lens. Each movement creates
a recording of a minute, after which, in the absence of movements, the DVR returns to rest
conditions waiting for a new intrusion.
Unlike many of our other investigative products, DK BK1 does not detect the intrusion according
to image editing, but using an infrared sensor, as used in car alarms.
This allows DK-BK1 to consume very little current so as to remain in stand-by waiting for the
intrusion even 2 years.
To start motion recording, you must move the ignition switch to MD.
The red LED
blink for 3 times to indicate the start of recording in motion detection mode. After starting the
recording close the calendar and place it upright on a shelf. Do not place it behind the objects that
may obstruct vision, or the operation of the detection sensor.
continuous Recording
Continuous recording takes up a lot of storage space, but it is sometimes necessary when, for
example, the uninterrupted audio recording is important, even if there is no motion in front of the
lens. In continuous recording, the DVR records Factory consecutive files for 2 minutes.
To continuously record must turn the ignition switch to REC. The blue LED will flash 3 times to
indicate the start of recording.
Viewing files on PC
To review and manage files recorded by the DVR you have to use a computer.
Connect the USB port of the DK-BK1 to a computer's USB port with the supplied cable. Flick the
switch REC position. The device is detected in the computer's resources as a removable disk and
behaves like a common USB stick. Depending on your operating system you may start an
automatic procedure, or you'll have to explore your PC to find the new disc.
And 'possible to copy movies (AVI format) on your PC and play it with any video player
(recommended VLC - VideoLAN).
E 'can play video files directly from the SD card, without copying them to your PC, but this may
reduce the quality and flow of play so we recommend this only to preview and then download the
files to your PC relevant.
PIR Sensor
The detection of the product of this movement is effected by a passive infrared sensor placed
under the objective. In order to function properly it is necessary that it can spread its detection in
the room. For this reason, do not place objects that obstruct Whereas has an aperture of
detection of approximately 60 °.
infrared Illuminator
DK-BK1 is also equipped with an infrared illuminator placed over
the goal that allows
the vision
monochrome in the dark up to 6 meters. The illuminator turns on by itself when it is being
recorded and the lighting is not sufficient.
Setting the date / time and overwrite
DK-BK1 sovraimprime on records the date and time it was captured. To adjust the date and time,
and also define whether or not you want the automatic overwrite memory is full, proceed as
follows. Connect the DVR to your PC with the switch in the REC position. Explore with Windows
Explorer the contents of memory as for playing video files. Memory Inside, next to the record
folder, you will find a text file called: YW_TIME.TXT
Open it with a text editor such as NOTEPAD to write in it.