4
Home Screen
Figure 1 - Home Screen
System Status/Away Arm button
- when disarmed, indicates that pressing will away arm the system; when
armed, indicates that pressing will stay arm it
.
Stay Arm button
-
indicates your arming option alternative to the one in the System Status message bar.
Zone Status button
- shows open zones or zones in alarm.
Voice Chime button
- selects whether the chime will be heard on the keypad, and whether it will be verbal
chime, audible chime or disabled. (This does not affect the system chime status.)
More button
- allows you to select Functions, Installer Options, or User Options.
Time/date and temperature
- displays time/date and room temperature.
Trouble/alarm in memory
- only displayed when these conditions are present.
Emergency button
- takes you to the screen to choose from Fire, Auxiliary and Panic keys.
Arming and Disarming the System
See also Night Arming and No-Entry Arming on page
8.
Stay Arm (Arming the Perimeter)
Home > Stay Arm
Ask your alarm company if this function is available on your system.
Stay arming bypasses the interior protection (i.e., motion sensors) and arms the perimeter of the system
(i.e., doors and windows).
1. Close all sensors (i.e., stop motion and close doors). The Ready ( ) indicator should be on.
2. Press the Stay Arm button (and enter your Access Code) and do not leave the premises.
• The verbal prompt announces “Stay Arming in Progress”. An exit delay period follows.
• During exit delay, the Armed ( ) and Ready indicators turn on to visually indicate that the sys-
tem is arming. The display indicates “Exit Delay in Progress,” and the pre-programmed exit
delay begins. The exit delay allows an individual to leave the premises while arming the system
for those still on the premises. When the exit delay expires, the Ready LED turns off, the Armed
LED remains on and the keypad stops sounding to indicate that the alarm system is armed.
NOTE: For SIA FAR listed panels, the Stay Arming exit delay will be twice as long as the Away
Arming exit delay.
Silent Exit Delay
If the system is armed using the Stay Arm button or using the “No-Entry” Arming method (see page
8),
the audible progress annunciation (keypad buzzer) is silenced and the exit time doubled for that exit
period only (CP-01 versions only).
NOTE: For non CP-01 versions, Standard exit time is used.
Disarm
Home > Disarm
To disarm the system
When Disarm is selected from the Home screen, a numerical keypad is displayed. Enter your Access
Code in the keypad. If an invalid code is entered, “invalid code” will appear on the screen and an error
tone will sound. Re-enter the correct code.
