manualshive.com logo in svg

DSC PC5928, Быстрый старт, Страница: 10 / 16

Поделиться
Скачать
DSC PC5928 Скачать руководство пользователя страница 10

10

P R O G R A M  D E S C R I P T I O N S

Local Alarm Follower ..................................... Section [30], Option [1]

5.6

Talk/Listen-In

The “Event Buffer follows Swinger Shutdown” option must be enabled in the
PC5010 if Talk/Listen-In is used.

The PC5928 Audio Interface module has built-in Talk/Listen-In capability which can be
activated by zone alarms, keypad activated Auxiliary and Panic alarms, openings/closings,
duress alarms, tamper alarms, or opening after alarm conditions.

In all cases, the PC5010 must be programmed to report the event with communi-
cations enabled.  For example, if a reporting code for a zone is not programmed,
it will not initiate Talk/Listen-In session.

The “Event Buffer Follows Swinger Shutdown” option must be enabled in the PC5010 to
ensure proper Talk/Listen-In operation.

A zone alarm will activate the feature if the zone is assigned to a station (

Zone Assignment

)

and the zone is enabled for Talk/Listen-In (

Audio Control 

options). This is programmable by

zone. If the zone is not enabled in the 

Audio Control 

options,

 

the zone will not initiate Talk/

Listen-In. If the zone is not assigned to a station, the PC5928 will turn on all stations.

All zones programmed as silent will not initiate a Talk/Listen-In session.  Only a
Listen-In session can occur.

Keypad Panic alarms will activate the Listen In feature, if the 

Panic Keys Alarm 

option is

enabled.

Keypad Auxiliary alarms will activate the feature if the 

Auxiliary Keys Alarm 

option is enabled.

Listen in will be initiated if a Duress code is entered at a keypad and the 

Duress Alarm

option is enabled.

Talk/Listen-In will be initiated when the panel transmits opening and closing signals if the
Openings & Closings option is enabled.  If this option is enabled, it is recommended to
enable the Duress Alarm option.

Talk/Listen-In will be initiated when a zone tamper condition occurs if the 

Tampers Enabled

option is enabled.

Module tampers will not initiate a Talk/Listen-In session.

Talk/Listen-In will be initiated when a zone expander supervisory trouble condition occurs if
the 

Zone Expander Supervisory Trouble Alarm 

option is enabled.

Talk/Listen-In will be initiated when the panel is disarmed after an alarm condition (Opening
After Alarm) if the 

Opening After Alarm 

option is enabled.

If the 

Listen To All Stations 

option is enabled the PC5928 will turn on all stations instead of

just the one closest to the zone or keypad.

A Talk/Listen-In session cannot be initiated for a 2-wire smoke or F-key alarm.

firealarmresources.com

Содержание PC5928

















Отзывы:

Нет отзывов