![DSC PC5102-433 Скачать руководство пользователя страница 8](http://html1.mh-extra.com/html/dsc/pc5102-433/pc5102-433_installation-manual_2534697008.webp)
8
Section 7: Troubleshooting
Section 7: Troubleshooting
Section 7: Troubleshooting
Section 7: Troubleshooting
Section 7: Troubleshooting
1. When I enter Sections [41] - [48] to add a wireless key, the keypad
sounds a long beep.
You cannot enter ESNs unless a PC5102-433 wireless receiver is connected to the
Keybus. See section 2 for instructions on setting up and wiring the PC5102-433 module.
2. I have entered the ESN for the wireless key but when I press the
function keys, the panel does not perform the desired function.
Check the following:
• Ensure the ESN has been entered correctly.
• Ensure that the function keys have been programmed for the requested function.
• Ensure that the wireless key is enabled for the partition (if partition programming is
used).
3. When I press the wireless key function buttons, I see no results.
Check the following (see sections 5.1 and 5.2 for more information on testing devices):
• Verify that you are testing the correct zone.
• Verify that the correct ESN was entered when the device was enrolled.
• Verify that the device is in range of the PC5102. Try testing the device in the same
room as the receiver.
• Confirm that the PC5102-433 is properly connected to the Keybus (see section 2 for
PC5102-433 setup and wiring instructions).
• Check that you are testing the wireless key correctly (see sections 5.1 and 5.2 for
testing instructions).
• Check that the batteries are working and installed correctly.
• Look for large metal objects that may be preventing the signal from reaching the
PC5102.
• Ensure that all wireless keys operate correctly throughout.
[804] 5102-433 Wireless Expansion Programming
• 6-digit entry is required.
See Section 3.1 “A note on Electronic Serial Numbers”
for details on programming 6-digit serial numbers.
Section 8: Programming Worksheets
Section 8: Programming Worksheets
Section 8: Programming Worksheets
Section 8: Programming Worksheets
Section 8: Programming Worksheets
Wireless Key Serial Numbers
Default = 000000
[41]
Key 01
l_____l_____l_____l_____l_____l_____l
[42]
Key 02
l_____l_____l_____l_____l_____l_____l
[43]
Key 03
l_____l_____l_____l_____l_____l_____l
[44]
Key 04
l_____l_____l_____l_____l_____l_____l
[45]
Key 05
l_____l_____l_____l_____l_____l_____l
[46]
Key 05
l_____l_____l_____l_____l_____l_____l
[47]
Key 07
l_____l_____l_____l_____l_____l_____l
[48]
Key 08
l_____l_____l_____l_____l_____l_____l
firealarmresources.com