DSC Alarm PC5401 Serial Module
/2
2
HARDWARE INSTALLATION
Warnings:
Before installation of PC5401 Serial Module
¾
Remove existing PC5400 Printer Module (With panel powered down)
¾
Enable DSC Alarm Supervision (function 902)
¾
Now install PC5401 Serial Module (With panel powered down)
¾
Enable DSC Alarm Supervision (function 902)
2.1
PC5401 Serial Module
For all official specification read carefully DSC documentation. Remember by adding new composite in
your Alarm Panel require to calculate the Current Draw to calibrate de power requirement with panel
power supply. This board require: 35mA
Notes:
Its recommended, that all DSC Alarm equipments installation must be done by an
authorize representative (Service Persons Only)
Warnings:
Disconnect the AC power supply module and panel batteries before to install
the new card
2.1.1
Baud Rate Selection
¾
BAUD selection can only be changed by cycling power to the module (Default: 9600 BAUD)
BAUD
JP3
JP2
JP1
4800 ON
ON
Off
9600
Off Off Off
19200 ON Off ON
57600 ON Off Off
Table 1 - Baud Rate Selection
