24
GSM/GPRS Alarm Communicators
Repeat Call
:
This field is used to enter the number of attempts to be performed (up to a maximum of 8) if the call is not successful.
Repeat Message
:
This field is used to enter the number of times a message is repeated (up to a maximum of 8) when the call is
answered.
Call All Numbers
:
Select this option
to call all telephone numbers programmed for an individual event and play the voice message
assigned to it. If this option is not selected
, the dialer will end the voice calls as soon as one of them has been completed successfully.
Call Confirmation
:
Select this option if you want the dialer to wait for confirmation from the remote user that the voice message has
been received, otherwise the dialer will attempt to deliver the voice message again: the remote user can send confirmation by pressing
the
button on his/her telephone (only applies to touch-tone keypads).
CAUTION - By pressing the
button on your own telephone when listening to a voice message, both the current
telephone call and any others in progress may be blocked.
Periodic voice
This section is used to program periodic voice message options.
You MUST enter the “SIM Phone Number” and enable the “Auto Clock Adjusting” in the “Options” page to setup the
Periodic Voice’s options.
Date of first send
:
Select the date on which the first periodic voice message is to be sent.
Time of first send
:
Select the time at which the first periodic voice message is to be sent.
Interval
:
Enter the interval (HH-DD) at which subsequent periodic voice messages are to be sent. The interval consists of the
following values:
– (HH) next message time - Select the hour value for the next periodic voice message. The interval for these values may be set
between 0 and 23.
– (DD) next message day - Select the day value for the next periodic voice message. The interval for these values may be set
between 0 and 365.
Update time
:
Select this icon to get local date and time from the PC.
Local Service Mode
By selecting the
Local service mode
button, you can enable the voice messages playing/recording by a touchtone telephone connected
to the [L.I.] terminals of the device (refer to “Local Voice Message Recording” and “Local Voice Message Replaying”). When this mode is
enabled, the green LEDs L1 and L2 flash (see
Status Leds->table 2
). The LEDs only stop flashing when the recording or replaying
procedure is complete, or after 60 seconds have elapsed without any of the buttons being pressed.
You can connect ONLY ONE telephone to the [LI] terminals for proper working of the Local Service Mode.
SMS dialer (GS3125 series only)
This page is to setup the SMS dialer’options, as indicated following.
Event type
:
The ‘Event type’ column has 11 separate lines listing the events for which two SMS messages are sent, if programmed:
one for activation and one for resetting (the "Periodic SMS" event only sends an activation SMS).
To select SMS messages for the 3 programmable input lines, set the corresponding terminal as an input (see I/O-
>Type).
Telephone numbers
:
Click the ‘12345678’ columns in accordance with the desired input. A tick
indicates that the SMS message
will be sent to a particular telephone number when the corresponding event occurs.
The telephone numbers are the first 8 entries on the “Phonebook” page.
SMS String
:
In the ‘
SMS String
’ column, click the box corresponding to the message to be programmed and enter the message you
wish to send when the relevant event occurs (maximum 100 characters).
Periodic SMS
This section is used to program periodic SMS message options.
You MUST enter the “SIM Phone Number” and enable the “Auto Clock Adjusting” in the “Options” page to setup the
Periodic SMS’s options.
Date of First Send
:
Select the date on which the first periodic SMS message is to be sent.
Time of First Send
:
Select the time at which the first periodic SMS message is to be sent.
Содержание GS3100-BX
Страница 75: ...GS3125 GS3105 75 I I I I I...
