Configuration
2
4
5
1
7
6
LOCAL ACTUATORS
Activate lights on connected units; trigger USB
keystrokes: Green (“ ”), Yellow ( B); Red (
”)
]
\
“
“
1.
LIGHT BRIGHTNESS
Hi, Lo, Off
2.
SOUND VOLUME
Hi, Lo, Off
3.
HEADPHONE JACK
Accepts stereo phono plug; mutes speaker
4.
USB Ports “A” and “B”
For direct computer connection. Cue light sends
pre-programmed keystrokes.
Cue light may be powered from USB but other
connected devices will not work without external
power. External power is recommended for operation.
Note:
5.
MASTER - SLAVE SWITCH
Master turns on RF reception. When two or more cue
lights are connected by cable, set the one closest to
transmitter as MASTER; the other(s) as SLAVE.
6.
COMMUNICATIONS CHANNEL
For multi-unit proximate use. Match DIP switches
on transmitters.
8.
AUTO - USB SWITCH
Engage / disengage USB connections
7.
EXTERNAL POWER
Use DSan-supplied 12-volt AC power wall plug trans-
former with center pin (+) positive
only.
9.
RJ45 Jack
For interconnection with other cue lights.
10.
XLR Jack
11.
Arrow sweep, repetitions,
duration, sound files set by
configuration app.
Download link for cue light configuration app (PC only)
www.dsan.com/PerfectCue
=
=
=
=
Install and launch program.
Connect external power.
Connect computer using the “A” USB Port.
Enter new settings. Click “Save to PerfectCue”.
Controls and Connections
